I'll see if anyone here might be interested. This was my ride for a couple years before it got pushed to the back corner of the garage and forgot about. It is no longer a complete bike. I have taken the engine and exhaust from it to use in another project. What is left and shown in the last picture of my Webshots album is what I am selling. It consists of one of my frames, NO NUMBERS or title with it because here in Wisconsin I use titled engines for my builds, so you may have to jump through hoops at your DMV to title it. The frame is DOM tubing and jig built. It has a 45 degree rake with a stock 750 front end. It has a 3 gallon mustang tank with hidden mounts. The rear fender was narrowed and re-radiused to hug the 170/80x 15 rear tire with a VLX rim. The oil tank is stainless steel and has a small built in battery box. I ran a small scooter battery and used kick start only. The sissy bar and forward controls are also made out of stainless. Again, THERE IS NO ENGINE OR EXHAUST anymore. This is a project. I don't think stock 750 headpipes will clear the frame up front without mods so exhaust will not be as easy as just bolt something on and go; you may have to cut and fab something to fit. The front brake is not on it in the last picture but it is in the garage. I'm asking $750 for what is here.
Now for the hard part, lets see if I can make a link to my Webshots work.
http://good-times.webshots.com/album/569837082LcrOoF
Now for the hard part, lets see if I can make a link to my Webshots work.
http://good-times.webshots.com/album/569837082LcrOoF

