NEEDED / WANTED

engine

feeds@yuku.com (ed4650158) — Mon, 23 Nov 2009 12:37:54 GMT

looking for a 750 motor in or around iowa,thx ed

Anyone got any extra solo seat Springs?

feeds@yuku.com (landman76) — Mon, 23 Nov 2009 11:56:45 GMT

If ya got some laying around lemme know what ya want....or maybe trade.

rear brake caliper needed

feeds@yuku.com (daddyschatz) — Sun, 22 Nov 2009 14:42:58 GMT

next project has comstar, have a rear brake etup with a junk caliper. it looks like 78-82 share the same part number.

stainless steel tubing

feeds@yuku.com (kiki licker) — Sun, 22 Nov 2009 12:51:01 GMT

1/4" OD, anyone got some? about 3' straight stick of it???

ribbed fender

feeds@yuku.com (stinkyscooter) — Sun, 22 Nov 2009 11:28:51 GMT

Look'n for a ribbed rear fender.If any one can help send a pic.
Thanks guys.

points cover

feeds@yuku.com (motorcyclejack) — Fri, 20 Nov 2009 12:24:44 GMT

hi guys. i need a like new stock points cover. anyone have one they want to part with for a decent price.

rear fender 180

feeds@yuku.com (holmesa81) — Thu, 19 Nov 2009 16:42:17 GMT

looking for a steel 180 fender i can use for part of my seat pan, does not need to be a complete fender. i do have some stuff for trade.

A few riding pics!

feeds@yuku.com (landman76) — Thu, 19 Nov 2009 13:34:36 GMT

I want a few more riding pics for the calendar. Literally only like 2 or 3.

Send your GOOD riding pics of you on your Honda Chop. If they are of high enough resolution I will try to squeeze them in.

Send what you've got to: barry6st@hotmail.com

Thanks hedz.

4 float needles and 4 pilot jets

feeds@yuku.com (WildBillyBones) — Thu, 19 Nov 2009 08:43:40 GMT

Anybody have an extra set they wanna part with? Or does anybody know where I can get em without buying the whole kits? Just don't need the other stuff that comes with em and once ya add up the price of all the kits (which would be 8 in this case) it turns into too much moola if yer not gonna use it all. Know what I mean? Always appreciate yer help and experience bros.

oil tank

feeds@yuku.com (ed4650158) — Wed, 18 Nov 2009 12:57:07 GMT

looking for round or hex oil tank with stock honda 750 fittings and battery box,have one with smaller fitting will trade for one . or someone who can fix up the one i got,thx

oil tank with a deep chain cut away

feeds@yuku.com (t1m32sh1n3) — Tue, 17 Nov 2009 18:34:44 GMT

round would be nice but hell if you have something else that might work let me know. computer doesnt let me on here very often so.......... cposey78@aol.com

Stock 'matic pilot jets

feeds@yuku.com (dtmmil) — Tue, 17 Nov 2009 15:27:34 GMT

I am thinking the stockers are a #38 and are the press ins like the 77-78 carbs, if someone has a set of 4 they would like to part with please let me know. thanks

carb boot

feeds@yuku.com (Donny) — Mon, 16 Nov 2009 18:33:28 GMT

needed: one (1) measley carb boot, for the 2-3 carb.

I bought a set ebay.....of course got phucked, 3 good ones, one was some other boot. You know how it goes, sometimes It's not worth all the hassle to go thru ebay to correct this.

Gas caps for Night train tank....for ray ray's bike.

feeds@yuku.com (stubbysteve) — Mon, 16 Nov 2009 12:53:41 GMT

Ok got a tank off an 01 night train, no caps or petcock. the right cap is the only one that gas goes in the other is the damn fuel guage hole. I dont know if a reg cap will work in there or not. But we need the caps and a petcock. thanks,

lookin for running chop

feeds@yuku.com (jessespit85) — Mon, 16 Nov 2009 12:43:56 GMT

Around iowa or surounding state, gots to be cheap and run

how to build a bike-books videos magazine adds ?

feeds@yuku.com (KILLemALL) — Mon, 16 Nov 2009 10:06:28 GMT

im lookin for some stuff to give to the guy i gave the chassis to. his hearts in it 100% and hes way over ambitious. the problem is he dont have a lick of common sense about it. he called me just stoked yesterday to come see how much he had done to it so i went over to see it. he covered it in bicycle parts and duct tape. it isnt safe to push in and out of the shed much less ride. i finally found a job so im not gonna be able to do 90% of the work and sit over his shoulder for the other 10 %...

Looking for a cb 750 hijacked

feeds@yuku.com (dinoswoman) — Sun, 15 Nov 2009 10:25:30 GMT

throttle and cable

feeds@yuku.com (stinkyscooter) — Sat, 14 Nov 2009 19:58:04 GMT

Hey Guys.I got a still in the pack 50" throttle cable and never used a 1" retro throttle and grips from cycle X .I'm ofring these to anyone wanting to
run 1" bars or building a new bike.Decided on duel carbs and can't use them. these are free IF YOU'RE GONA USE THEM, I don't want the
going on somones shelf when they could be getting someone out of a jamb. I could use the carma getting my bike finished. hope it helps someone.

130 mains

feeds@yuku.com (55fbomb) — Sat, 14 Nov 2009 15:20:32 GMT

anyone got any 130 main jets, or somethin close? new or used i dont care, thanks.

any one got some shifter linkages,,,,,,

feeds@yuku.com (stubbysteve) — Sat, 14 Nov 2009 14:45:51 GMT

like the aftermarket harley ones?????